We all know that when wearing jewelry, there are some matters that we must pay attention to. For example, do not wear when we are exercising, and it is best not to wear it when we take a bath. These precautions are to better maintain us. The color of the jewelry is not worn during exercise to avoid causing some unnecessary harm to the body, so let's take a look at what problems you need to pay attention to when processing.

Jewelry

1. Avoid placing the workbench under the sun, because the strong sunlight will seriously affect human vision, inlaid processing, especially when welding It is easy to cause problems such as virtual welding or excessive temperature caused by insufficient heating during welding. For a long time under strong light, it will damage the eyes. To this end, when the production workshop resettlement workbench must be sufficient, but also cannot be exposed to the sun.

2. During the processing process, in order to clean the surface of the workpiece or to weld the workpiece firmly, the heated workpiece must be placed in a chemical such as acid and alum. After the heating workpiece enters the acid liquid, it will produce a strong smell and corrosive gases. This gas will not only corrode the metal tools and equipment, but also harm the skin and skin. Therefore, setting up a good ventilation makes air circulation particularly important. It is best to set the ventilation pipes to the roof to avoid blowing the exhaust gas from the air back into the room.

3. Most machines and equipment in the workshop require power to start, and lighting also requires power supply. The installation of the power plug should be reasonable. The equipment that is closest to the most required for the power supply must have a dedicated socket, and you cannot share a socket with other devices. It is best to be a dark wire to avoid the wires across the workbench or near the fire and acid, because the wires are easily damaged, and the exposed wires are dangerous.