Jewelry believes that every woman loves it. There must be a jewelry jewelry in a woman's jewelry box. Jewelry is not only good -looking, but also a lot of benefits to bring people. When making jewelry, we are pursuing perfect Flawless, excellence, need to be strictly inspected when leaving the factory. The requirements are very high. If you want to go out of the workshop, it is as difficult as the carp leaping the dragon door. do we need to care something?

1. Avoid placing the workbench under the sun, because the strong sunlight will seriously affect people's vision, inlaid processing, especially when welding It is easy to cause problems such as deficiency welding or excessive temperature due to insufficient heating during welding.

2. During the inlaid process, in order to clean the surface of the workpiece or to weld the workpiece firmly, the heated workpiece must be frequently placed in chemicals such as acid and alum. After the heating workpiece enters the acid liquid, it will produce a strong smell and corrosive gas. This gas will not only corrode the metal tools and equipment, but also harm the skin and skin. Therefore, setting up a good ventilation makes air circulation particularly important. It is best to set the ventilation pipes to the roof to avoid blowing the exhaust gas from the air back into the room.

3. Most machines and equipment in the workshop require power to start, and lighting also requires power supply. The installation of the power plug should be reasonable. The equipment that is closest to the power supply and the equipment with a large power must have a dedicated socket and cannot share a socket with other equipment. The wire is best to be dark wires, avoiding the wires across the workbench or close to the fire and acid, because the wires are easily damaged, and the exposed wire is dangerous.

4. A adjustable height and orientation of the workbench should be installed on the workbench. It can not only light up from all aspects, but also not affect inlaid processing. The lighting lights of the workbench are preferably made of electroplating metal hose and enamel lamp cover. This kind of light is not only flexible, but also has anti -corrosion.

5. The final process of the pavilion inlaid processing is polishing and cleaning. The dust produced by polishing is dirty and the noise of the machine is also greater. In order to reduce pollution and noise, the best way is to separate the polishing equipment or seal the polishing equipment.