(1) The stainless steel jewelry we often say is a very special metal jewelry. It is very resistant to corrosion and will not be darkened like silver. Can maintain his original color at room temperature.

(2) Specific production

1. Edition. We need to use silver plate suppressed rubber molds to produce wax plates in batches to make loss of wax casting. This is the highest process in the production process of stainless steel jewelry. It requires the surface hollow part and the back of the silver plate smoothly. The location and size of the diamond are accurate, and some of them need to be pre -processed on the inlaid part so that they can enter the process of losing wax casting.

2. Loss of wax casting is also called inverted mold, which is currently an important way to produce stainless steel jewelry. The steps are: gel film, open rubber film and waxing film, pouring and baking gypsum, melting steel and casting, cleaning gypsum film, holding film and inlay, and polishing.

Here we will talk about the opening and polishing of the rubber film and the waxing film. Open the rubber film and glue film. The first step is to open the film, the second step is to inject the wax film, and the last step is to trim the wax film and plant the wax tree; This craft has a pivotal position in stainless steel jewelry. The surface of the jewelry after polishing should be extremely bright, giving people a dazzling beauty to achieve a mirror -like effect and attract customers' attention.

(3) Several common post -processing technology

1. Batch flowers, also known as carvings, are carved on metals or alloys with rotating knives.

2. Laser laser processing, laser processing without pollution sources, is a high -environmental processing technology with clean -free pollution -free and non -pollution.

3 Estability can be divided into wet etching and dry etching. It refers to removing the plastic wrap at the required carvis after the exposure is exposed to achieve the effect of dissolving and corrosion, forming different effects such as uneven or hollowing out.

4. Sand spray is divided into dry sand and water sand, which refers to local sandblasting to enhance the beauty of jewelry lines.

5. Electroplating can not only protect the surface of the jewelry, but also make the surface more beautiful.