Precautions One

   Avoid placing the workbench under the sun, because the strong sunlight will seriously affect human vision, inlaid processing, especially when welding, it is difficult to distinguish the color changes of heating workpieces. During welding, problems such as deficiency welding or too high temperature caused by welding collapse are caused. For a long time under strong light, it will damage the eyes. To this end, when the workshop is resettled, it must be sufficient and cannot be exposed to the sun.

    Precautions II

    In the process of inlaid processing, in order to clean the surface of the workpiece or to weld the workpiece firmly, the heated workpiece must be frequently placed in chemicals such as acid and alum. After the heating workpiece enters the acid liquid, it will produce a strong smell and corrosive gas. This gas will not only corrode the metal tools and equipment, but also harm the skin and skin. Therefore, setting up a good ventilation makes air circulation particularly important. It is best to set the ventilation pipes to the roof to avoid blowing the exhaust gas from the air back into the room.

   Precautions III

   Most machines and equipment in the workshop require power to start, and lighting also requires power. The installation of the power plug should be reasonable. The equipment that is closest to the power supply and the equipment with a large power must have a dedicated socket and cannot share a socket with other equipment. The wire is best to be dark wires, avoiding the wires across the workbench or close to the fire and acid, because the wires are easily damaged, and the exposed wire is dangerous.

   Note Four

   A adjustable height and orientation of lighting should be installed on the workbench. It can not only light up from all aspects, but also does not affect inlaid processing. The lighting lights of the workbench are preferably made of electroplating metal hose and enamel lamp cover. This kind of light is not only flexible, but also has anti -corrosion. Usually, incandescent lights are clear, and the lights should not be too strong or too weak, usually around 60W.